=============================================================================
VANTA Display Driver for Windows 95/98 v2.00             06th September 1999
=============================================================================

Operating systems supported
---------------------------
Microsoft Windows 95
Microsoft Windows 98

File list
---------
NVAGP.INF    - Windows 9x display driver information file for AGP adapters
NVCPL.DLL    - Display properties extension
NVCPL.HLP    - Display properties extension help file
NVDD32.DLL   - DirectDraw driver
NVDISP.DRV   - Display driver
NVOPENGL.DLL - OpenGL driver
NVQTWK.DLL   - Taskbar applet
NVARCH16.DLL - Interface layer to NV architecture for 16-bit clients
NVARCH32.DLL - Interface layer to NV architecture for 32-bit clients
NVCORE.VXD   - Resource Manager kernel
NVMINI.VXD   - Mini-VDD for VGA virtualization and device Plug-N-Play
NVMINI2.VXD  - Mini-VDD for device Plug-N-Play of secondary devices
README.TXT   - The file you're reading.
VGARTD.VXD   - Windows 95 AGP support file 

Installation instructions
-------------------------
Windows 95
----------

To prepare for installation of the drivers

1 Start Microsoft Windows 95.

2 Click the Start button, point to Settings, and click Control Panel.

3 Double-click Display, and click the Settings tab.

4 Click "Adapter", click the "Change" tab, click "Next".

5 Select the option to display a list of drivers, then click "Next".

6 Select Show all Hardware button, then select the Standard display
  types from the Manufactures list.

7 Select "Standard PCI Graphics Adapter (VGA)" from the list, then
  select "Next".

8 Click "Next" to install the driver, click "Finish", then select
  "Apply" to complete the installation.


To install the drivers

1 Click the Start button, point to Settings, and click Control Panel.

2 Double-click Display, and click the Settings tab.

3 Click "Advanced Properties", click the Adaptor tab, then click "Change".

4 Select "Have Disk", then insert the VANTA Installation CD into the 
  CDROM drive, and select the drive letter of the CDROM drive.

5 Select or type the path to the CDROM drive, then click "OK".

  Windows should find files for the Vanta. If Windows cannot 
  find the files, check that the path name for the CD is correct
  and that the correct CD is inserted in it. 

6 If Windows found the files, select OK.

  Windows copies the files to the hard disk.  

7 when finished copying, click "Apply", click "OK", then click "Apply".

8 Remove CD from the CDROM drive, then click "Yes" when Windows asks 
  if you wish to restart the computer.  


Windows 98
----------

To prepare for installation of the drivers

1 Start Microsoft Windows 98.

2 Click the Start button, point to Settings, and click Control Panel.

3 Double-click Display, and click the Settings tab.

4 Click "Adapter", click the "Change" tab, click "Next".

5 Select the option to display a list of drivers, then click "Next".

6 Select Show all Hardware button, then select the Standard display types
  from the Manufactures list.

7 Select "Standard PCI Graphics Adapter (VGA)" from the list, then select
  "Next".

8 Click "Next" to install the driver, click "Finish", then select "Apply"
  to complete the installation.



To install the drivers

1 Click the Start button, point to Settings, and click Control Panel.

2 Double-click Display, and click the Settings tab.

3 Click "Advanced Properties", click the Adaptor tab, then click "Change".

4 Insert the Vanta Installation CD into the CDROM drive.

5 Click "Next" then Click "Next" again.

5 Select or type the path to the CDROM drive, then click OK.

  Windows should find files for the Vanta. If Windows cannot 
  find the files, check that the path name for the CD is correct and 
  that the correct CD is inserted in it. 

6 If Windows found the files, click Next.

  Windows copies the files to the hard disk.  

7 Click "Finish" to complete the installation.

8 Remove CD from the CDROM drive, then click "Yes" when Windows asks 
  if you wish to restart the computer.  


Uninstall instructions
----------------------

To uninstall the drivers

1 Click the Start button, point to Settings, and click Control Panel.

2 Double-click Add/Remove Programs, select Control Freak, then click
  Add/Remove.


Technical Support 
=================
     

        ***********************************************************
        *  In case you encounter any problem with our products,   *
        *  please quote the following model(s) when calling our   *
        *  Technical Support :                                    *
        *                              Vanta Graphic Accelerator  *
        *********************************************************** 


 
                         -------  Thank You  ---------                                                                              -------  Thank You  ---------


